• 10PPM Laser Printing at 600x600dpi
• Holds up to 150 sheets in its paper tray
• 300x300dpi color scanner
• 10PPM Copier function with up to 4800dpi of resolution (interloaped)
• 6 seconds scanning function
• 6 seconds faxing function
• 80 Speed dials for the fax
• 2MB of memory
• USB Interface

The included color scanner features 300x300dpi scanning, averaged at 6 seconds per page. The unit is TWAIN compatible for windows based machines. After testing out the scanning features, I must say that 6 seconds per page is virtually impossible, even for a simple text scan. Scanning a text page took 36 seconds and over 4 minutes for a color flyer. The tests were done on 256MB-based machine using the USB interface of the WorkCentre. Even there, we could consider these numbers reasonable for a low-end scanner. Anyhow, I don’t think anybody will consider a paper scanner for serious work. After doing some research, the 6 second scanning claim is the speed of the WorkCentre reading the source, the extra time to transmit it to the computer will vary from PC to PC.

The fax machine of the WorkCentre 390 features a 300x300dpi resolution. The fax it self is operating directly from the scanner, in other words, both function are achieved from the same part of the unit. It features 80 speed dials and can hold up to 150 pages in the memory. Again here, it takes about 6 seconds per page to read the source (input).

The Copier function is claimed to reproduce 10-PPM, from our test, we achieved a maximum of 7.5 PPM with text combined with graphics. The copier can go up to 4800dpi (interpolated). You have an enlargement-reduction option on it. You can go from 50-200% in 1-% increments. The maximum multicopy amount is of 99 and the maximum output set is 100.

This was purchased from a government agency where routine maintenance was carried out on this machine.   Very nice, clean and ready to go.

Shipping will be through USPS. Weight is 25 pounds.

Thank you for looking